| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7wOCg4_SumikonPMTX110.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| SUMIKON PM-TX110 is a Heat dissipative themoset molding compounds, Electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.11 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.33 | % | JIS K6911 |
| Water Absorption (Equilibrium) | 0.080 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 20000 | MPa | JIS K6911 |
| Flexural Strength | 150 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.3 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 1.0 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 8.0 | kV/mm | JIS K6911 |
| Insulation Resistance | JIS K6911 | ||
| -- 2 | 5.0E+12 | ohms | JIS K6911 |
| -- 3 | 4.0E+11 | ohms | JIS K6911 |
| Note Message | |
|---|---|
| 1 . | Method B (step by step) |
| 2 . | As molded |
| 3 . | After boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tekulac ST 50 FR | TEKUMA Kunststoff GmbH | ABS | Tekulac |
| CERTENE™ LLBF-120F | Muehlstein | LLDPE | CERTENE™ |
| Chemlon® 415 G | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
| Daelim Po1y® LH-58120 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| EPO-TEK® H35-175MPT | Epoxy Technology Inc. | Epoxy | EPO-TEK® |