Order Products : sales@su-jiao.com

PPO™ 843 resin

Category:	PPE+PS , Polyphenylene Ether + PS
Manufacturer:	SABIC Innovative Plastics
Trademark:	PPO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7vUKcs_PPO843resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PPO* 843 resin is a medium-high molecular weight copolymer based on Polyphenylene Ether (PPE) and Siloxane. PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: PPE-Siloxane copolymer Formula: (C8H8O)n(SiC2H6O)m Regulatory Status: Complies with EC Reg. No. 10/2011 as amended through EC Reg. No. 2015/174.

Message

PPO* 843 resin is a medium-high molecular weight copolymer based on Polyphenylene Ether (PPE) and Siloxane. PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: PPE-Siloxane copolymer Formula: (C8H8O)n(SiC2H6O)m Regulatory Status: Complies with EC Reg. No. 10/2011 as amended through EC Reg. No. 2015/174.

General Information
Features	Copolymer Hydrolysis stability Medium wide molecular weight distribution
Uses	Additive
Agency Ratings	Europe 10/1/2011 12:00:00 AM
RoHS Compliance	RoHS compliance
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Density ¹	0.476	g/cm³	ISO 1183
D	2.60		Internal method
Mean Particle Size	400.0	µm	Internal method
Mn	14800		Internal method
Mw	36000		Internal method
Phenolic End-group Content	1000	ppm	Internal method
Tg (half width)	216	°C	Internal method
Intrinsic Viscosity	0.40	dl/g	Internal method

Additional Information	Nominal Value	Unit	Test Method
Toluene Content		ppm	Internal method

Note Message
1 .	Bulk Density

Resin Grade	Manufacturer	Category	Trademark
ALKAMIX™ MB6007	Qenos Pty Ltd	LLDPE	ALKAMIX™
Grilon® AZ 3	EMS-GRIVORY	Nylon 66	Grilon®
Huafon JF-W-D6055A	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon
Karina BLUE COLOR CONCENTRATE 06/213-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Lustran® ABS 308	INEOS ABS (USA)	ABS	Lustran® ABS