Order Products : sales@su-jiao.com
Glastic® 1401
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Bulk Molding Compounds, Inc. |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7vRcGu_Glastic-1401.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Grade 1401 is an electrical grade of encapsulating material. Characterized by a balance of soft flow and cure rate to ensure complete and proper encapsulation without voiding. Generally too soft for compression molding, but excellent in transfer or injection processes. Directly competitive against epoxy encapsulants on cost and cycle times. Very stable shelf life. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.76 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.25 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 28.6 | MPa | ASTM D638 |
| Flexural Strength (Compression Molded) | 82.7 | MPa | ASTM D790 |
| Compressive Strength | 110 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 80 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 11 | kV/mm | ASTM D149 |
| Dissipation Factor (60 Hz) | 0.015 | ASTM D150 | |
| Arc Resistance | 190 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP H7526 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| ULTZEX™ 4050 | Prime Polymer Co., Ltd. | LLDPE | ULTZEX™ |
| Akulon® K223-KMV6 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Geon™ HTX M6230 | PolyOne Corporation | PVC Alloy | Geon™ HTX |
| HIDEN® VH150U | YUHWA Korea Petrochemical Ind. Co., Ltd. | UHMWPE | HIDEN® |
