Order Products : sales@su-jiao.com
Glastic® UTR
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7uM0M0_Glastic-UTR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glastic UTR 1494 is a fiberglass reinforced thermoset polyester material. It is available in sheet form as well as a wide selection of channel, angle, and tube sizes. These materials are the industry standard for flame and arc/track resistant electrical insulation. In addition, the excellent combination of high strength, flame resistance, and low smoke generation has given it application in many other areas such as transit and marine where safe, yet economical materials are required. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.40 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (yield, 1.60mm) | 53.8 | MPa | ASTM D638 |
| Flexural Strength (yield, 1.60mm) | 152 | MPa | ASTM D790 |
| Compressive Strength (1.60 mm) | 228 | MPa | ASTM D695 |
| Shear Strength | 80.0 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 480 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow (1.60 mm) | 2.0E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.27 | W/m/K | ASTM C177 |
| RTI Elec (1.60 mm) | 130 | °C | UL 746 |
| RTI (1.60 mm) | 160 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| 1.60 mm, in Air | 18 | kV/mm | ASTM D149 |
| 1.60 mm, in Oil | 23 | kV/mm | ASTM D149 |
| Dissipation Factor | ASTM D150 | ||
| 1.60 mm, 60 Hz | 0.013 | ASTM D150 | |
| 1.60 mm, 1 MHz | 0.010 | ASTM D150 | |
| Arc Resistance (1.60 mm) | 180 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) (1.60 mm) | 500 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 | |
| Oxygen Index (1.60 mm) | 35 | % | ASTM D2863 |
| Additional Information |
|---|
| NEMA Grade: GPO-3/GPO-3PInsulation Resistance, ASTM D257: 3.1e12 ohmsFlame Rating, UL 94, over .063 in: V-OIgnition Time: 85 minBurn Time: 49 min |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro PP-CO-HF-20T | Pro Polymers | PP Copolymer | Pro-Comp™ |
| Sylvin 8785-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 86025-38DUV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TEREZ PA 6 7500 TF 20 GF 20 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Multilon® DN-3720F | TEIJIN LIMITED | PC+ABS | Multilon® |
