Order Products : sales@su-jiao.com

SCLAIR® 2714

Category:	HDPE , High Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	SCLAIR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7tMM1s_SCLAIR-2714.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

SCLAIR® 2714 is a High Density Polyethylene material. It is available in North America for injection molding.

Important attributes of SCLAIR® 2714 are:

Antioxidant

Food Contact Acceptable

Good Processability

Good Stiffness

Good Toughness

Typical applications include:

Caps/Lids/Closures

Containers

Food Contact Applications

General Information
Additive	Antioxidant
Features	Antioxidant Food Contact Acceptable Good Processability Good Stiffness Good Toughness High Density Low Temperature Impact Resistance
Uses	Food Containers Lids
Agency Ratings	FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.951	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	51	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	62		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	23.0	MPa	ASTM D638
Tensile Elongation ²(Break)	15	%	ASTM D638
Flexural Modulus	1000	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -70.0	°C	ASTM D746
Vicat Softening Temperature	119	°C	ASTM D1525

Additional Information	Nominal Value	Unit	Test Method
Snake Flow	360	mm	Internal Method

Note Message
1 .	50 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
Veroplas ASG35	PlastxWorld Inc.	SAN	Veroplas
Trithene® TS 8064	Petroquimica Triunfo	LDPE	Trithene®
Daelim Po1y® HX100S	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
ESTAPROP 1006	Cossa Polimeri S.r.l.	PP Homopolymer	ESTAPROP
IDI BMC 48-50	IDI Composites International	TS, Unspecified	IDI BMC