Order Products : sales@su-jiao.com
Osterlene® PPC-35-1.8-N
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7t9alK_Osterlene-PPC-35-1-8-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PPC-35-1.8-N is a high-flow, high-stiffness, polypropylene copolymer formulated for injection molding applications requiring a fast fill, high stiffness and moderate impact strength. PPC-35-1.8-N has been specially formulated with a nucleator and mold release for improved cycle times in thin-wall injection molding. PPC-35-1.8-N meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulations allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 96 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.2 | % | ASTM D638 |
| Flexural Modulus | 1100 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 96 | J/m | ASTM D256 |
| Unnotched Izod Impact (-18°C) | 1200 | J/m | ASTM D256 |
| Dart Drop Impact (23°C) | 28.2 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 102 | °C | ASTM D648 |
| Additional Information |
|---|
| The value listed as Unnotched Izod Impact, ASTM D256, was tested in accordance with ASTM D4812. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 221 | °C | |
| Middle Temperature | 232 | °C | |
| Front Temperature | 243 | °C | |
| Nozzle Temperature | 243 | °C | |
| Mold Temperature | 204 - 221 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ronalen M30 | Roonamid a.s. | PP, Unspecified | Ronalen |
| Sarlink® TPV 24972B | Teknor Apex Company | TPE | Sarlink® TPV |
| Torayca® 3101T-30V | Toray Resin Company | Nylon 66 | Torayca® |
| NEFTEKHIM PE 4133Q (33403) | Nizhnekamskneftekhim Inc. | MDPE | NEFTEKHIM PE |
| Optema™ TC 220 ExCo | ExxonMobil Chemical | EMA | Optema™ |
