Order Products : sales@su-jiao.com

Ravago Compounds HM-242

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Ravago Manufacturing Americas, LLC
Trademark:	Ravago Compounds
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7sEmFT_Ravago-Compounds-HM-242.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HM-242 is a process aid concentrate. It is added to LLDPE to reduce the occurrence of melt fracture and surface roughness in film and molded articles. It also will reduce extruder torques. Because the additive in HM-242 increases the critical shear rate for onset of melt-fracture, higher line speeds are often possible. Key Features: Uniform concentration of additives in concentrate Ease of addition and feeding into extrusion equipment Directions for Use: Preconditioning: Desired result will be achieved more quickly if the equipment is preconditioned by processing 6.6% HM-242 in LLDPE. This let-down results in 2000 ppm of the active ingredient. Normal operation: Typically used 1 to 4% HM-242 in LLDPE.

Message

HM-242 is a process aid concentrate. It is added to LLDPE to reduce the occurrence of melt fracture and surface roughness in film and molded articles. It also will reduce extruder torques. Because the additive in HM-242 increases the critical shear rate for onset of melt-fracture, higher line speeds are often possible.

Key Features:

Uniform concentration of additives in concentrate

Ease of addition and feeding into extrusion equipment

Directions for Use:
Preconditioning: Desired result will be achieved more quickly if the equipment is preconditioned by processing 6.6% HM-242 in LLDPE. This let-down results in 2000 ppm of the active ingredient.
Normal operation: Typically used 1 to 4% HM-242 in LLDPE.

General Information
Additive	Processing Aid (3%) 1
Features	Good Processability
Uses	Masterbatch
Agency Ratings	FDA Unspecified Rating
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR)	1.5	g/10 min	ASTM D1238

Additional Information	Nominal Value
Polymer Base	LLDPE

Resin Grade	Manufacturer	Category	Trademark
SABIC® LDPE 2404H4	Saudi Basic Industries Corporation (SABIC)	LDPE	SABIC® LDPE
TECHNO AES W270	Techno Polymer Co, Ltd.	AES	TECHNO AES
Nipol® SX1105A	Zeon Corporation	Latex	Nipol®
Daelim Po1y® LH6070S	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
Generic PPE+PS+Nylon	Generic	PPE+PS+Nylon	Generic