Order Products : sales@su-jiao.com
Tuftec™ H1517
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Tuftec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7s8r6d_Tuftec-H1517.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tuftec™ H1517 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Asia Pacific or Europe. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 92 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 7.60 | MPa | ISO 37 |
| Tensile Stress 1(Break) | 16.0 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 780 | % | ISO 37 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Styrene/Rubber ratio | 43/57 | Internal Method |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500 mm/min |
| 2 . | Type 1A, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7510 GF 30 FL HY /4 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Duratuf™ 830 | Technical Polymers, LLC | Acetal (POM) Copolymer | Duratuf™ |
| Formolene® L63568 | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| Hax™ HF 38 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| PLUSTEK RB845 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
