Order Products : sales@su-jiao.com
DOW™ Electrical & Telecommunications DGDA-1310 NT
| Category: | HDPE , Colorable High Density Polyethylene Compound for Cable Jacketing |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ Electrical & Telecommunications |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7qwdu2_DOW-Electrical-Telecommunications-DGDA-1310-NT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dow Electrical and Telecommunications DGDA-1310 NT High Density Polyethylene Resin is a high performance resin with an outstanding balance of processability and toughness. Dow Electrical and Telecommunications DGDA-1310 NT is designed for use in wire and cable extrusion for Monosil process and both power and telecommunication jacketing. DGDA-1310 NT also has excellent electrical properties and superior environmental stress crack resistance. Specifications Dow Electrical and Telecommunications DGDA-1310 NT meets the following specification:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.954 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.28 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 27 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 100% Igepal, F50) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 22.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | > 750 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 4 | 1000 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 5 | < -60.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.34 | ASTM D1531 | |
| Dissipation Factor (1 MHz) | 1.0E-4 | ASTM D1531 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 232 - 249 | °C |
| Extrusion instructions |
|---|
| Dow Electrical and Telecommunications DGDA-1310 NT provides excellent surface finish at high coating speeds. For optimum results, use melt extrusion temperatures in the suggested rang of 450 to 480°F (230 to 250°C). However, specific recommendations for processing conditions can be determined only when the applications and type of processing equipment are known. |
| Note Message | |
|---|---|
| 1 . | Plaque molded and tested in accordance with ASTM D4976. |
| 2 . | Plaque molded and tested in accordance with ASTM D4976. |
| 3 . | Plaque molded and tested in accordance with ASTM D4976. |
| 4 . | Plaque molded and tested in accordance with ASTM D4976. |
| 5 . | Plaque molded and tested in accordance with ASTM D4976. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® RE 8222 | Teknor Apex Company | PVC, Rigid | APEX® |
| Hostacom CR 1152 F | LyondellBasell Industries | PP Impact Copolymer | Hostacom |
| Hypro® PPH-T20 | Entec Polymers | PP Homopolymer | Hypro® |
| Kalix® 2855 | Solvay Specialty Polymers | HPPA | Kalix® |
| POLYFORT® FPP 1006 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
