Order Products : sales@su-jiao.com
RELENE® L 60040
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7q27fC_RELENE-L-60040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relene L 60040 is a UV stabilised narrow molecular weight distribution high density polyethylene grade suitable for injection molding applications. This grade exhibits very high impact strength, high gloss, good dimensional stability and superior ESCR properties. Relene L 60040 is recommended for applications where articles are exposed to sunlight like jumbo crates for fisheries, helmets, paint-pails, etc. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 900 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 950 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 30.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 230 to 270 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULINK® XL 350-S | A. Schulman Inc. | XLPE | SCHULINK® |
| Cheng Yu ML3435 | Cheng Yu Plastic Company Limited | PC | Cheng Yu |
| CompaDur® 121 GF 10 natural (003) | DimeLika Plast GmbH | PBT | CompaDur® |
| Elastron® D D100.A50.N | Elastron USA, Inc. | SBS | Elastron® D |
| KOPA® KN133G30BLL | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
