Order Products : sales@su-jiao.com
Braskem PE BU004W
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7q0RWv_Braskem-PE-BU004W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BU004W is a High Density Polyethylene (HDPE), copolymer, offering good processability, outstanding stiffness and excellent surface quality providing high gloss and differentiated optical properties. Application: Packing for dairy, juices, alcohol, cosmetics; Toys. Process: Blow Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.966 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.38 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 32 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (2.00 mm, 100% Igepal, Compression Molded, F50) | 30.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 30.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 200 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 79.0 | °C | ASTM D648 |
| Injection instructions |
|---|
| Recommended Blow Molding Conditions:Feeding Zone: 160 a 170°CBarrel: 170 a 180°CDie: 180 a 190°CMold Temperature Range: 5 a 25°CBlow up ratio: 3,0 a 4,5:1Screw Package (Mesh): 40/60/40Extruders equipped with L/D at least equal to 24 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUNPRENE® FE65HB | Mitsubishi Chemical Performance Polymers, Inc. | PVC Elastomer | SUNPRENE® |
| NuSil FS-3730-11 | NuSil Technology | Silicone | NuSil |
| Akulon® S245-C | DSM Engineering Plastics | Nylon 66 | Akulon® |
| LEXAN™ 945U resin | SABIC Innovative Plastics | PC | LEXAN™ |
| PETILEN S 23/59 | PETKIM Petrokimya Holding A.S. | PVC, Rigid | PETILEN |
