Order Products : sales@su-jiao.com

Lusin® Protect O 45 F

Category:	Unspecified , Unspecified
Manufacturer:	Chem-Trend L.P.
Trademark:	Lusin®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7nMZLi_LusinProtectO45F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Grease-based Anticorrosion and Lubricating agent Benefits NSF registered, conforms to H1 listing requirements Stable, transparent protective film Repels water Description Lusin® Protect O 45 F is an efficient anticorrosion agent that also shows lubricating properties. The grease base of Lusin® Protect O 45 F enables the product to penetrate into very fine cracks. Lusin® Protect O 45 F conforms to H1 category code and therefore complies with FDA 21 CFR §178.3570. Typical Properties Appearance : Transparent liquid Corrosion protection per DIN 50017 on steel type RST-37-2 : No corrosion after 40 hours Salt water spray test per DIN 50021 on steel type 101-A : No corrosion after 50 hours Application Lusin® Protect O 45 F s mainly used to protect moulds and dies dedicated for processing thermoplastic resins against corrosion.

Message

Grease-based Anticorrosion and Lubricating agent

Benefits

NSF registered, conforms to H1 listing requirements

Stable, transparent protective film

Repels water

Description
Lusin® Protect O 45 F is an efficient anticorrosion agent that also shows lubricating properties. The grease base of Lusin® Protect O 45 F enables the product to penetrate into very fine cracks.

Lusin® Protect O 45 F conforms to H1 category code and therefore complies with FDA 21 CFR §178.3570.

Typical Properties

Appearance : Transparent liquid

Corrosion protection per DIN 50017 on steel type RST-37-2 : No corrosion after 40 hours

Salt water spray test per DIN 50021 on steel type 101-A : No corrosion after 50 hours

Application
Lusin® Protect O 45 F s mainly used to protect moulds and dies dedicated for processing thermoplastic resins against corrosion.

General Information
Agency Ratings	FDA 21 CFR 178.3570 NSF Not Rated
Appearance	Clear/transparent
Forms	Liquid

Thermal	Nominal Value	Unit
Service Temperature		°C

Resin Grade	Manufacturer	Category	Trademark
Shandong Aobang TPU-Polyester 80-A	Shandong Aobang Chemical Technology Co.,Ltd.	TPU-Polyester	Shandong Aobang TPU-Polyester
Ferro PP NPP00GT24UL	Ferro Corporation	PP, Unspecified	Ferro PP
EPLAMID 6 IMP NC B801	EPSAN Plastik SAN. ve TiC. A.S.	Nylon 6	EPLAMID 6
INEOS LLDPE LL6608AF	INEOS Olefins & Polymers Europe	LLDPE	INEOS LLDPE
Iupital® ET-25	Mitsubishi Engineering-Plastics Corp	Acetal (POM) Copolymer	Iupital®