Order Products : sales@su-jiao.com
Torlon® 4601
| Category: | PAI , Polyamide-imide |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Torlon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7nHw5e_Torlon-4601.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Torlon® 4601 is a specialty wear-resistant grade of polyamide-imide (PAI). Most Torlon® PAI grades cannot be molded successfully in molds with undercuts. Torlon® 4601 has been formulated to be moldable in tools with minor undercuts and give very good performance in lubricated wear applications. Torlon® PAI has the highest strength and stiffness of any thermoplastic up to 275°C (525°F). It has outstanding resistance to wear, creep, and chemicals. Potential applications for Torlon® 4601 polyamide-imide include ball bearing cages and other molded articles that require undercut tooling. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4210 | MPa | ASTM D638 |
| Tensile Strength | 121 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.1 | % | ASTM D638 |
| Flexural Modulus | 4480 | MPa | ASTM D790 |
| Flexural Strength | 182 | MPa | ASTM D790 |
| Shear Strength | 108 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 230 | J/m | ASTM D256 |
| Unnotched Izod Impact | 370 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 284 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 177 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 304 | °C | |
| Nozzle Temperature | 371 | °C | |
| Mold Temperature | 199 - 216 | °C | |
| Back Pressure | 6.89 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Screw L/D Ratio | 18.0:1.0 - 24.0:1.0 |
| Injection instructions |
|---|
| Minimum drying times are: 3 hours at 350°F, 4 hours at 300°F, or 16 hours at 250°F.Compression Ratio: 1:1 to 1.5:1Begin hold pressure at a high setting 6,000-8,000 psi (41.37-55.16 MPa), for several seconds, then drop off to 3,000-5,000 psi (20.69-34.48 MPa), for the duration of the hold pressure sequence.Molded parts must be cured. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuang-Bang C-8207N | Shuang-Bang Industrial Corp. | Film, TPU | Shuang-Bang |
| Ebalta MG 426 / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| Hifax DG 232 2693 | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| Estane® 5714 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| HIPTEN® 22020 | HIP-PetroHemija | LDPE | HIPTEN® |
