Order Products : sales@su-jiao.com
TECAFORM® MT
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECAFORM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7mpmyT_TECAFORM-MT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECAFORM® MT is Ensinger's specially formulated medical grade acetal. The material is resistant to multiple cleaning and disinfection agents, and to a number of solvents. It can be steam sterilized by medical industry's usual methods, and will maintain good strength, stiffness, and dimensional stability. The material feedstock meets the requirements specified by the American Food and Drug Administration (FDA) and its code Federal Regulations, CFR 21. It has also been fully assessed for biocompatibility acording to U.S. Pharmacopia (USP) Class VI and ISO 10993. It is available in a wide variety of standard colors and custom colors as well. While used for a great number of medical applications, TECAFORM® MT is particularly suited for use as sizing trials in knee, hip, and shoulder replacement procedures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| Saturation | 0.50 | % | ASTM D570 |
| Balance, 50% RH | < 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2100 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 55.0 | MPa | ASTM D638 |
| Tensile Strain (Yield) | 30 | % | ISO 527-2 |
| Creep rupture strength- after 1000 hr. | 40 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature - Long Term | 100 | °C | |
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Glass Transition Temperature | -60.0 | °C | |
| Peak Melting Temperature | 160 | °C | ASTM D3418 |
| CLTE - Flow (23 to 55°C) | 9.9E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Dielectric Constant (100 kHz) | 3.50 | IEC 250 | |
| Dissipation Factor | 3.0E-3 | IEC 250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Time Yeild Limit to 1% Elongation After 1,000 hr: 1,890 psiData obtained from extruded shapes material. |
| Note Message | |
|---|---|
| 1 . | 1.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ C16UST2Z | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| RTP 300 TFE 10 Z | RTP Company | PC | RTP |
| Radilon® AGV 30 Natural | Radici Plastics | Nylon 66 | Radilon® |
| Shuman PC FR910V0 | Shuman Plastics, Inc. | PC | Shuman PC |
| Andur AL 80-5 AP | Anderson Development Company | PUR-Eth,aliphat | Andur |
