Order Products : sales@su-jiao.com
Alpha PVC GW 3026 NAT.LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7k7u8W_Alpha-PVC-GW-3026-NAT-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 60°C OR 75°C RATED, LEAD FREE, HIGH QUALITY, HIGHLY FLAME RETARDED JACKETING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.46 to 1.50 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 15 sec | 91 to 97 | ||
| Shore D | 59 to 65 | ||
| Shore D, 15 sec | 43 to 49 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.610 mm | 18.6 | MPa | |
| 1.91 mm | 17.2 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break, 1.91 mm | 240 | % | |
| Break, 0.610 mm | 230 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1 | UL Unspecified | ||
| 100°C, 168 hr | 10 | % | |
| 100°C, 240 hr | -1.0 | % | |
| Change in Ultimate Elongation in Air 2 | UL Unspecified | ||
| 38°C, 168 hr | 5.0 | % | |
| 100°C, 240 hr | -17 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -15.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 3.30 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.022 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 40 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 143 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 163 | °C | |
| Cylinder Zone 4 Temp. | 168 | °C | |
| Cylinder Zone 5 Temp. | 174 | °C | |
| Adapter Temperature | 174 | °C | |
| Melt Temperature | 174 to 177 | °C | |
| Die Temperature | 174 | °C |
| Note Message | |
|---|---|
| 1 . | Thickness: 24 mil |
| 2 . | Thickness: 24 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMILITE® PL-1252 (Punching) | Sumitomo Bakelite Co., Ltd. | Phenolic | SUMILITE® |
| ACRYLITE® Hi-Gloss FT15 | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® |
| CGPC PVC R-10X NI Extrusion | China General Plastics Corporation | PVC, Flexible | CGPC PVC |
| HANWHA EVA 2040 | Hanwha Chemical | EVA | HANWHA EVA |
| TECHNYL® A 118 V50 BLACK 21 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
