AXELERON™ GP 6059 BK CPD Datasheet,LLDPE,The Dow Chemical Company-SHANGHAI SUSHENG

AXELERON™ GP 6059 BK CPD

Wechat: WECHAT

Message
AXELERON™ GP 6059 BK CPD is a prime quality telephone cable black jacketing compound ("CPD"). It offers improved low temperature and high temperature performance plus excellent environmental stress-cracking resistance, outdoor weatherability, and toughness. Specifications AXELERON™ GP 6059 BK CPD meets the following raw material specifications: ASTM D 1248 IC-4, Grades E5, J1, J3 Federal LP-390C III-L, Grades 2, 3, 4 and Category 4 REA PE-22, 38, 39, 86, 89, 90 (Raw Materials Sections) ISO 1872-PE, KCH, 18-D006 GB/T 15065 Cable jacketed with AXELERON™ GP 6059 BK CPD, using sound commercial extrusion practices, should meet the following specifications: ICEA: S-83-640 ASTM D 2308 Telcordia GR-421-CORE EN 50290-2-24 IEC 60708 YD/T 901 IEC 60502 ST3, ST7 IEC 60840 ST3, ST7 HD 620 S2, Part 1, Table 4B, DMP 10, DMP 14, DMP 17 ICEA S-94-649 ICEA S-97-682 ICEA S-108-720 ICEA S-84-608 YD/T 1092 IEC 62067, ST3, ST7 IEC 60794

Message

AXELERON™ GP 6059 BK CPD is a prime quality telephone cable black jacketing compound ("CPD"). It offers improved low temperature and high temperature performance plus excellent environmental stress-cracking resistance, outdoor weatherability, and toughness.

Specifications
AXELERON™ GP 6059 BK CPD meets the following raw material specifications:

ASTM D 1248 IC-4, Grades E5, J1, J3

Federal LP-390C III-L, Grades 2, 3, 4 and Category 4

REA PE-22, 38, 39, 86, 89, 90 (Raw Materials Sections)

ISO 1872-PE, KCH, 18-D006

GB/T 15065

Cable jacketed with AXELERON™ GP 6059 BK CPD, using sound commercial extrusion practices, should meet the following specifications:

ICEA: S-83-640

ASTM D 2308

Telcordia GR-421-CORE

EN 50290-2-24

IEC 60708

YD/T 901

IEC 60502 ST3, ST7

IEC 60840 ST3, ST7

HD 620 S2, Part 1, Table 4B, DMP 10, DMP 14, DMP 17

ICEA S-94-649

ICEA S-97-682

ICEA S-108-720

ICEA S-84-608

YD/T 1092

IEC 62067, ST3, ST7

IEC 60794

General Information
Uses	Cable sheath Cable sheath Wire and cable applications Wire sheath Communication wire sheath
Agency Ratings	AAMA 303 ASTM D 1248, I, Class C, Cat. 4, Grade E5 ASTM D 1248, I, Class C, Cat. 4, Grade J1 ASTM D 1248, I, Class C, Cat. 4, Grade J3 EN 50290-2-24 FED L-P-390C, Type III, Class L, Category 4, Grade 2 FED L-P-390C, Type III, Class L, Category 4, Grade 2 ICEA S-108-720 ICEA S-84-608 ICEA S-94-649 ICEA S-97-682 IEC 60502 Type ST3 IEC 60502 Type ST7 IEC 60708 IEC 62067 Type ST7 REA PE-22 REA PE-38 REA PE-39 REA PE-89
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Density	0.932	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.60	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance ¹(10% Igepal, F0)	> 1000	hr	ASTM D1693
Carbon Black Content	2.6	%	ASTM D1603
Absorption Coefficient - (kAB/m)	> 400		ASTM D3349

Thermal	Nominal Value	Unit	Test Method
Oxidation Induction Time (200°C)	120	min	ASTM D3895

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength
--	21.0	MPa	IEC 60811-502
--	16.2	MPa	ASTM D638
Tensile Elongation
Fracture	900	%	IEC 60811-502
Fracture	700	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature			ASTM D746
-- ²	< -100	°C	ASTM D746
-- ³	< -76.0	°C	ASTM D746

Electrical	Nominal Value		Test Method
Dielectric Constant (1 MHz)	2.48		ASTM D1531
Dissipation Factor (1 MHz)	3.0E-4		ASTM D1531

Extrusion	Nominal Value	Unit
Melt Temperature	218 - 246	°C

Extrusion instructions
AXELERON™ GP 6059 BK CPD provides excellent surface finish and outstanding output rates over a broad range of conditions. For optimum results, use melt extrusion temperatures in the suggested range of 425 to 475°F (218 to 246°C).Hopper drying at 150-160°F (67-71°C) is recommended to remove moisture.

Note Message
1 .	Typical value per IEC 60811-406 > 1000 hrs.
2 .	F50
3 .	Notched, F50

Resin Grade	Manufacturer	Category	Trademark
Precision Polymer Z93B	Precision Polymer Engineering Ltd.	NBR	Precision Polymer
RTP 105 F	RTP Company	PP Homopolymer	RTP
Ferro PP LPP30BC94BK	Ferro Corporation	PP Homopolymer	Ferro PP
IDI STC 2353 Woven	IDI Composites International	Polyester, TS	IDI STC
OmniPro™ TPO MF10 HSV	OMNI Plastics, LLC	TPE	OmniPro™

Resin Grade

Manufacturer

Category:	LLDPE , Black Linear Low Density Polyethylene Compound for Cable Jacketing
Manufacturer:	The Dow Chemical Company
Trademark:	AXELERON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7ignWO_AXELERON-GP-6059-BK-CPD.pdf
PRICE:	Order Products email sales@su-jiao.com