Order Products : sales@su-jiao.com
ADMER™ NF377E
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7iCahh_ADMER-NF377E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® NF377E is an maleic anhydride grafted, PE-LLD-based adhesive designed for PE-cast film structures with PA and EVOH. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.30 | MPa | |
| Break | 25.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RIALGLASS C 07 JW 15 G | RIALTI Srl | PP Copolymer | RIALGLASS |
| S&E Wire & Cable GTPE-2272ALC | S&E Specialty Polymers, LLC | TPE | S&E Wire & Cable |
| VESTAMID® HTplus R1133 | Evonik Industries AG | PPA | VESTAMID® HTplus |
| WINDFORM® FX | CRP Technology s.r.l. | Nylon, Unspecified | WINDFORM® |
| EZPrene 9070A | ENPLAST Americas, a Ravago Group Company | TPV | EZPrene |
