Order Products : sales@su-jiao.com
Latamid 6 H2 G/20-V2HF
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Latamid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7i8YBF_Latamid-6-H2-G-20-V2HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Compound based on Polyamide 6 (PA 6). Heat stabilised. Glass fibres. UL94 V-2 classified, halogens and red phosphorous free. Product UL certified. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.32 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.55 to 0.80 | % | |
| Flow : 2.00 mm | 0.65 to 0.90 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 5500 | MPa | |
| 60°C | 4200 | MPa | |
| 90°C | 2600 | MPa | |
| 120°C | 2100 | MPa | |
| 150°C | 1700 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 90°C | 40.0 | MPa | |
| Yield, 120°C | 35.0 | MPa | |
| Yield, 150°C | 20.0 | MPa | |
| Break, 23°C | 80.0 | MPa | |
| Break, 60°C | 60.0 | MPa | |
| Break, 90°C | 35.0 | MPa | |
| Break, 120°C | 30.0 | MPa | |
| Break, 150°C | 15.0 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 90°C | 3.2 | % | |
| Yield, 120°C | 3.8 | % | |
| Yield, 150°C | 4.5 | % | |
| Break, 23°C | 3.5 | % | |
| Break, 60°C | 4.3 | % | |
| Break, 90°C | 7.0 | % | |
| Break, 120°C | 9.0 | % | |
| Break, 150°C | 15 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 30 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact (23°C, 3.20 mm) | 35 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 190 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 175 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 80.0 | °C | |
| Vicat Softening Temperature | 205 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 2.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index 3(Solution A) | 550 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-2 | ||
| 1.50 mm | V-2 | ||
| 3.00 mm | V-2 | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.00 mm | 960 | °C | |
| 2.00 mm | 960 | °C | |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | ||
| 1.00 mm | 725 | °C | |
| 2.00 mm | 725 | °C | |
| Oxygen Index | 27 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 240 to 260 | °C | |
| Mold Temperature | 70.0 to 100 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | at 60 Mpa of cavity pressure |
| 2 . | 20,000 hr |
| 3 . | Without Surfactant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8426-70 Black | Sylvin Technologies Incorporated | PVC+PUR | Sylvin |
| Ad-Tech Epoxy EL-302-PC-LP | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| GERMAMID 6.6 GF 50 | Kunststoff-Kontor-Hamburg GmbH | Nylon 66 | GERMAMID |
| HONES® PBT GF15 | Guangdong Shunde Hones Polymer Material Co., Ltd. | PBT | HONES® |
| Jackdaw PP ER16NT6658 | Jackdaw Polymers | PP, Unspecified | Jackdaw PP |
