Order Products : sales@su-jiao.com

Marlex® PP HGZ-350SP

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Saudi Polymers Company
Trademark:	Marlex® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7epGPF_Marlex-PP-HGZ-350SP.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Typical injection moulding applications include:

Thin wall containers

Toys

Hospital ware

Good resistance to gas fading

General Information
Features	Homopolymer Resistance to gas fading Controlled rheology Compliance of Food Exposure
Uses	Thin wall container Toys Medical equipment
Agency Ratings	FDA not rated Europe No 10/2011
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.903	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (shaw d, 3.20mm, injection molding)	71		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	40.0	MPa	ASTM D638
Flexural Modulus - Secant ²(3.20 mm, Injection Molded)	1790	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	21	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm, Injection Molded)	113	°C	ASTM D648

Additional Information
Mechanical properties were determined using injection-moulded specimens 3.2 mm thick, moulded per ASTM D4101, unless otherwise noted.

Note Message
1 .	51 mm/min
2 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 1700 TFE 13 SI 2	RTP Company	PPE+PS	RTP
Quadrant EPP Proteus® White	Quadrant Engineering Plastic Products	PP Homopolymer	Quadrant EPP
Versalloy™ XL 9045-1	PolyOne Corporation	TPE	Versalloy™
HiFill® PC/PBT IM 5220 E UV	Techmer Engineered Solutions	PC+PBT	HiFill®
Optix® CA-927 GHF	Plaskolite, Inc.	Acrylic (PMMA)	Optix®