Order Products : sales@su-jiao.com
INEOS HDPE T50-800-01
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7eGfTt_INEOS-HDPE-T50-800-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| T50-800-01 is a high density polyethylene copolymer having a narrow molecular weight distribution intended for general purpose injection molding applications where a good balance of processability and end-use properties are required. This material meets the Food and Drug Administration requirements of 21CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 3.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 27.6 | MPa | |
| Break | 22.4 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 10 | % | |
| Break | > 1200 | % | |
| Flexural Modulus - Tangent | 1190 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 37 | J/m | ASTM D256 |
| Notched Izod Impact (Area) (23°C) | 3.70 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 76.1 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TORZEN® U4820L BKB01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| XYFLUOR® 860 | Greene, Tweed & Co. | Fluorelastomer | XYFLUOR® |
| NEFTEKHIM PE 4121N (22401) | Nizhnekamskneftekhim Inc. | LLDPE | NEFTEKHIM PE |
| DOMAMID® 6GM404 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| Iupiace® TX903B | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
