Order Products : sales@su-jiao.com
ESTOPLAST XU 6800NN01
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ester Industries Ltd. |
| Trademark: | ESTOPLAST XU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7dmeUW_ESTOPLASTXU6800NN01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyamide 66 - PTFE Filled grade Automotive: Gear parts, Bushes, mechanical parts Electrical & Electronic: Mechanical parts |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (275°C/1.2 kg) | 40 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 65.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 20 | % | ASTM D638 |
| Flexural Strength | 100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 50 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 70.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.5 mm) | V-2 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85 - 90 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 260 - 270 | °C | |
| Middle Temperature | 280 - 290 | °C | |
| Nozzle Temperature | 275 - 285 | °C | |
| Processing (Melt) Temp | 275 - 285 | °C | |
| Mold Temperature | 60 - 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 TFE 5 SI 2 Z | RTP Company | Nylon 66 | RTP |
| ALCOM® PA6 900/1 MO1 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Sylvin 7833-85 Orange 5115 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| MARPOL® HDM 507 | Marco Polo International, Inc. | HDPE | MARPOL® |
| LNP™ THERMOCOMP™ LC003E compound | SABIC Innovative Plastics | PEEK | LNP™ THERMOCOMP™ |
