Order Products : sales@su-jiao.com
ALCUDIA® LDPE 2625FG
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7ZQ7eB_ALCUDIA-LDPE-2625FG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® 2625FG is a low density polyethylene grade, produced by high pressure autoclave technology, for thin blown film or cast film applications. This material offers easy processability and good balance of mechanical and optical properties. It contains slip (erucamide), antioxidant and antiblock additives. ALCUDIA® 2625FG fulfils the food contact regulations in most countries. For further information or certificates, contact our Customer Service Offices. APPLICATIONS -Pouches with good optical properties
Recommended melt temperature range from 140 to 165°C. Processing conditions should be optimised for each production line |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.926 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (vs. Itself - Dynamic, Blown Film) | < 0.10 | ISO 8295 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Tensile Stress | ISO 527-3 | ||
| MD : Broken, 30 µm, blown film | 25.0 | MPa | ISO 527-3 |
| TD : Broken, 30 µm, blown film | 18.0 | MPa | ISO 527-3 |
| Tensile Elongation | ISO 527-3 | ||
| MD : Broken, 30 µm, blown film | 150 | % | ISO 527-3 |
| TD : Broken, 30 µm, blown film | 550 | % | ISO 527-3 |
| Dart Drop Impact (30 µm, Blown Film) | 75 | g | ISO 7765-1 |
| Elmendorf Tear Strength | ISO 6383-2 | ||
| MD : 30 µm, blown film | 1.8 | N | ISO 6383-2 |
| TD : 30 µm, blown film | 1.2 | N | ISO 6383-2 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 30.0 µm, Blown Film) | 50 | ASTM D2457 | |
| Haze (30.0 µm, Blown Film) | 10 | % | ASTM D1003 |
| Additional Information |
|---|
| Data taken from 30 µm thickness film, blow up ratio 2.5:1. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 140 - 165 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® ABS 530/29 BL1497-04MCF | ALBIS PLASTIC GmbH | ABS | ALCOM® ABS |
| Durez® 33830 | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| Equinox® 35 Fast | Smooth-On, Inc | Silicone | Equinox® |
| Kingfa GFPP-L20 | Kingfa | PP, Unspecified | Kingfa |
| Karina CLEAR PVC COMPOUND -E 80/321-IS-RG | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
