Order Products : sales@su-jiao.com
ICORENE® 5704
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7XIfpp_ICORENE-5704.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 5704 is a metallocene high density polyethylene specifically developed for rotational moulding. ICORENE® 5704 is a suitable grade for use in kayaks and boats applications. It has a good balance of properties such as toughness easy flow and stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.0 | MPa | ASTM D638 |
| Flexural Modulus | 695 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 17 | kJ/m² | ISO 179 |
| Drop Impact Resistance 1(-20°C) | 200 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo PP AW564 | Sumitomo Chemical Asia | PP Copolymer | Sumitomo PP |
| apilon 52® A-52/1 | API SpA | TPU-Polyester | apilon 52® |
| EPO-TEK® H37-MPT | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Kingfa PA6-MG45 | Kingfa | Nylon 6 | Kingfa |
| KumhoSunny ABS 728 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
