Order Products : sales@su-jiao.com
Dryflex® PCW 50D801B
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7U0FYq_Dryflex-PCW-50D801B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex PCW 50D801B: Thermoplastic Elastomer Base Material: TPO Hardness: 50 Shore D Service Temperature Range: -50 to +120°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE Special Features: This grade contains approximately 80% by weight of Post Consumer Waste |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 to 2.0 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 12.9 | MPa | ISO 37 |
| Tensile Elongation (Break) | 24 | % | ISO 37 |
| Tear Strength 2 | 82 | kN/m | ISO 34-1 |
| Compression Set 3 | ISO 815 | ||
| 23°C, 23 hr | 73 | % | |
| 70°C, 23 hr | 81 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature 4 | -50 to 120 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 230 | °C | |
| Middle Temperature | 180 to 230 | °C | |
| Front Temperature | 180 to 230 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on e.g. shape of the detail and placement of gate |
| 2 . | Method C, Crescent |
| 3 . | Type B |
| 4 . | Unstressed Material |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP VLF 80107 CC | RTP Company | PP, Unspecified | RTP |
| Shin-Etsu Elastomer KEG-2000-20A/B | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| SumiDurez PM 8235 | SumiDurez Singapore Pte Ltd | Phenolic | SumiDurez |
| Borealis PP ZC135 | Borealis AG | TPO | Borealis PP |
| Desmopan® DP 6080A | Covestro - PUR | TPU, Unspecified | Desmopan® |
