Order Products : sales@su-jiao.com
EPIGUM DPE/80 F
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | EPIGUM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7T3gGc_EPIGUM-DPE-80-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EPIGUM DPE/80 F is a thermoplastic elastomer. EPIGUM DPE/80 F is a TPV vulcanized rubber workable as thermoplastic compound. Suitable also for food contact. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Moisture | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 490 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 17 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 3.80 | MPa | ASTM D412 |
| Tear Strength 2(23°C) | 43.8 | kN/m | ASTM D624 |
| Compression Set (100°C, 22 hr) | 40 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Mass (121°C, 24 hr) | 65 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 215 | °C | |
| Die Temperature | 220 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VENELENE® 6200B | Poliolefinas Internacionales, C.A. (Polinter) | HDPE | VENELENE® |
| Viprene™ G45D-32U-BLK | Alliance Polymers & Services | TPV | Viprene™ |
| NEXT REGRIND PC/ABS MC8002-300RG | NEXT Specialty Resins, Inc. | PC+ABS | NEXT REGRIND |
| EMPILON® 590 | EMPILON | SEBS | EMPILON® |
| LNP™ STAT-LOY™ 9X05426C compound | SABIC Innovative Plastics | Acrylic (PMMA) | LNP™ STAT-LOY™ |
