Order Products : sales@su-jiao.com
Adell Polyamide AF-10-667A
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7Qgskn_Adell-Polyamide-AF-10-667A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell Polyamide AF-10-667A is a Polyamide 66 (Nylon 66) material. It is available in North America. Primary attribute of Adell Polyamide AF-10-667A: Flame Retardant. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.60 to 0.90 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 55.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 27 | J/m | ASTM D256 |
| Tensile Impact Strength | 94.6 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 204 | °C | |
| 1.8 MPa, Unannealed | 116 | °C | |
| Melting Temperature | 246 to 254 | °C | |
| RTI Elec (0.710 mm) | 130 | °C | UL 746 |
| RTI Imp | UL 746 | ||
| 0.710 mm | 75.0 | °C | |
| 1.47 mm | 80.0 | °C | |
| RTI Str | UL 746 | ||
| 0.710 mm | 120 | °C | |
| 1.47 mm | 130 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Arc Resistance (3.05 mm) | 60.0 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) (3.05 mm) | 160 | V | UL 746 |
| High Amp Arc Ignition (HAI) (0.710 mm) | 120 | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) | 124 | mm/min | UL 746 |
| Hot-wire Ignition (HWI) | UL 746 | ||
| 0.710 mm | 23 | sec | |
| 1.47 mm | 45 | sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Gebablend 85 | geba Kunststoffcompounds GmbH | PC+ABS | Gebablend |
| Elastron® G G400.A05.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Hylon® N1213STHL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Plaslube® PA6 TS15 BK | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
| SQUARE® SSR8630-40AF/BF | Shenzhen SQUARE Silicone Co., Ltd. | Silicone | SQUARE® |
