Order Products : sales@su-jiao.com
Sasol Polymers PE LT033 (Extrusion/Blow molding)
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Sasol Polymers |
| Trademark: | Sasol Polymers PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7HslBk_Sasol-Polymers-PE-LT033-Extrusion-Blow-molding-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
Applications
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.33 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal CO-630, F50) | 25.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 12.0 | MPa | |
| Break | 16.0 | MPa | |
| Tensile Elongation 2(Break) | 460 | % | ASTM D638 |
| Flexural Modulus | 347 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 99.5 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 140 to 180 | °C | |
| Cylinder Zone 2 Temp. | 150 to 190 | °C | |
| Cylinder Zone 3 Temp. | 160 to 200 | °C | |
| Cylinder Zone 4 Temp. | 170 to 210 | °C | |
| Cylinder Zone 5 Temp. | 180 to 210 | °C | |
| Melt Temperature | 190 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 03-R0039B-85NT | Teknor Apex Company | PVC, Flexible | APEX® |
| CYCOLOY™ CX7211 resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
| Dynaflex™ G7980-1001-00 | PolyOne Corporation | TPE | Dynaflex™ |
| Hyundai EP PA6 LS900 | HYUNDAI EP Co., Ltd. | Nylon 6 | Hyundai EP PA6 |
| Medalist® MD-12180 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Medalist™ |
