Order Products : sales@su-jiao.com
SEQUEL® 1718
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7GCmZS_SEQUEL-1718.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sequel 1718 thermoplastic polyolefin is designed for painted automotive exterior applications that require dimensional stability over a broad temperature range. This material exhibits excellent processability and low-temperature properties. Typical Customer Applications Exterior Applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 15 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield, 4.00 mm) | 20.0 | MPa | ISO 527-2/50 |
| Flexural Modulus (4.00 mm) | 1600 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact 2(23°C) | 19.0 | J | ASTM D3763 |
| Note Message | |
|---|---|
| 1 . | 150x10x4 mm specimen |
| 2 . | 2.20 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex MP-0670 | SAMSUNG SDI CO., LTD. | ABS | Starex |
| DIOSHY® LP-830 | DIOSHY Co.,Ltd. | SEBS+SBS | DIOSHY® |
| FM® 450-1 | Cytec Industries Inc. | MAH-g | FM® |
| Hanwha Total PE P110A | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
| HyTemp® AR74 | Zeon Chemicals L.P. | Acrylic, Unspecified | HyTemp® |
