Order Products : sales@su-jiao.com

Mirakutoran® TPU E685

Category:	TPU Alloy , Thermoplastic Polyurethane Elastomer Alloy
Manufacturer:	Japan Mirakutoran Inc.
Trademark:	Mirakutoran® TPU
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7EBsLd_Mirakutoran-TPU-E685.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Our TPU "Mirakutoran ®" has the following outstanding features.

Has excellent wear resistance

Tensile strength, high mechanical strength and tear strength

Is a wide range of hardness

High impact strength

Oil resistance and good chemical resistance

Excellent low temperature properties, weather resistance, ozone resistance and is also good

Flexible rubber elastic, vibration-effective silencing

Compared to other urethane elastomer thermoplastic that is more

Playback can be processed

Vulcanization process without curing reaction, very high productivity

Resins and other polymer is easy

Solution is easily dissolved in solvent process

Mirakutoran to the standard type E and P are two types.

Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure

General Information
Features	Shock absorption Impact resistance, good Good strength Good flexibility Good tear strength Ozone resistance Low temperature resistance Good chemical resistance Good wear resistance Good weather resistance Oil resistance

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.17	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 23°C, 2.00mm, injection molding)	83 - 87		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Taber Abrasion Resistance (23°C, 1000 Cycles, 1000 g, H-22 Wheel)	40.0	mg	ASTM D1044

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% strain, 23°C, 2.00mm)	6.00	MPa	ASTM D412
Tensile Strength ²(Yield, 23°C, 2.00 mm)	45.0	MPa	ASTM D412
Tensile Elongation ³(Break, 23°C, 2.00 mm)	630	%	ASTM D412
Tear Strength ⁴(23°C, 2.00 mm)	98.0	kN/m	ASTM D624
Rebound Resilience (23°C, 2.00 mm)	48	%

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	131	°C	ASTM D1525 ⁵

Additional Information
Test Methods: JIS K7311, K6262, K7206

Note Message
1 .	300 mm/min
2 .	300 mm/min
3 .	300 mm/min
4 .	300 mm/min
5 .	压力1 (10N)

Resin Grade	Manufacturer	Category	Trademark
PrimaFlex® HD 6107	Plastic Solutions, Inc.	HDPE	PrimaFlex®
Sanren M700R (1st-grade)	SINOPEC Shanghai Petrochemical Co. Ltd.	PP Copolymer	Sanren
TABOREN PC 42 T 20	SILON s.ro	PP Copolymer	TABOREN
VICTREX® PEEK 380P	Victrex plc	PEEK	VICTREX® PEEK
TYNAB® GM80	Tyne Plastics LLC.	ABS	TYNAB®