Order Products : sales@su-jiao.com
Integra™ ABS 10 GP
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | PolySource, LLC |
| Trademark: | Integra™ ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7DyYFL_Integra-ABS-10-GP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| General Purpose, High Flow ABS |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 49.6 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2410 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.35 mm) | 240 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 87.8 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | ||
| 3.00 mm | HB |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Abstron KU600N | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Bergamid™ A70 G15 H BK013 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| ELASTOSIL® R 510/60 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| OP - PEI 20GF | Oxford Polymers | PEI | OP - PEI |
| Styropek® BFL 295 | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
