HyTemp® PV04

Category: Acrylic, Unspecified , Acrylic
Manufacturer: Zeon Chemicals L.P.
Trademark: HyTemp®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 7D8qzA_HyTemp-PV04.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
HYTEMP® POLYACRYLATE (ACM) elastomers are ideally suited for applications requiring long-term performance in severe temperature and fluid environments. HyTemp can be compounded to withstand an impressive temperature range from -40°C to 200°C. These elastomers offer excellent long-term heat and compression set resistance while providing superb resistance to petroleum and synthetic-based lubricants. HyTemp can be tailored to specific material specifications through the proper choice of elastomer grade. To accommodate multiple application needs, a wide range of HyTemp grades is available. Representing some of the industry's most advanced innovations, HyTemp yields exceptional compressive stress relaxation performance in high-temperature sealing functions. HyTemp can be processed using all common thermoset methods, including compression, transfer, injection molding, calendering and extrusion. This makes HyTemp ideal for automotive under-hood applications such as transmission seals, engine seals, and both oil- an air-management hoses. Industrial applications include binders, adhesives and seals.

Special Properties/Applications
Peroxide-curable elastomer suitable for O-rings, seals and gaskets. Also used for binders, adhesives, caulks and plastics modification.
General Information
Features
  • High Heat Resistance
  • Oil Resistant
Uses
  • Adhesives
  • Automotive Under the Hood
  • Binder
  • Hose
  • Industrial Applications
  • Plastics Modification
  • Seals
Processing Method
  • Calendering
  • Compression Molding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
PhysicalNominal ValueUnit
Specific Gravity 1.10g/cm³
Mooney Viscosity 25 to 40MU
Additional InformationNominal ValueUnit
Cure Agent Proprietary
Gehman Torsion Test - T100 1-30°C
Volume Swelling 245%
Note Message
1 .On a nominal 65 Shore A, non-plasticized compound.
2 .IRM 903 oil, 70 Hr. @ 150°C
Resin Grade Manufacturer Category Trademark
Mediprene® 500900M ELASTO SEBS Mediprene®
Stanyl® TS271A1 DSM Engineering Plastics Nylon 46 Stanyl®
Baydur® 665 IBS (35 pcf) Covestro - PUR PUR-MDI Baydur®
FORMOCON® FM025 Formosa Plastics Corporation Acetal (POM) Copolymer FORMOCON®
Leona™ 91G40 Asahi Kasei Chemicals Corporation Nylon 66 Leona™