Order Products : sales@su-jiao.com
KRATON® D1102 A
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7Ct31X_KRATON-D1102-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1102 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass (AU) or 29.5%mass (AS, ASM) from Europe in the physical form(s) identified below in the grade nomenclature:
Kraton D1102 A is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 2781 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 8.0 | g/10 min | ISO 1133 |
| Solution Viscosity 1 | 900 to 1500 | mPa·s | Internal Method |
| Bound Styrene | Internal Method | ||
| -- 2 | 27.5 to 29.5 | % | |
| -- 3 | 28.5 to 30.5 | % | |
| -- 4 | 28.5 to 30.5 | % | |
| Antioxidant Additive | > 0.14 | % | Internal Method |
| Ash Content | ISO 247 | ||
| AS | < 0.40 | % | |
| ASM | 2.5 to 5.0 | % | |
| AU | < 0.20 | % | |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec, Compression Molded) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.90 | MPa | ISO 37 |
| Tensile Stress (Break) | 33.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 880 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | 25%w Toluene, 25°C |
| 2 . | AU |
| 3 . | ASM |
| 4 . | AS |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reny® 1012H | Mitsubishi Engineering-Plastics Corp | PARA | Reny® |
| NEFTEKHIM PP 2641J (T31SE) | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| Chemical Resources LD38921 | Chemical Resources, Inc. | LDPE | Chemical Resources |
| GLS PP MH1 | GLS Polymers Pvt. Ltd. | PP, Unspecified | GLS PP |
| EnviroABS 530GF30 | West Michigan Compounding | ABS | EnviroABS |
