Order Products : sales@su-jiao.com
Elastocon® CLR15
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 77gZ7K_ElastoconCLR15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® CLR15 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR15 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR15 is supplied as ready to use pellets in 40 lb. bag quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 15 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.220 | MPa | ASTM D412 |
| Tensile Strength | 6.08 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 860 | % | ASTM D412 |
| Tear Strength | 20.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 188 - 199 | °C | |
| Front Temperature | 193 - 204 | °C | |
| Nozzle Temperature | 199 - 204 | °C | |
| Processing (Melt) Temp | 199 - 204 | °C | |
| Mold Temperature | 16 - 49 | °C | |
| Injection Rate | Slow | ||
| Back Pressure | 0.172 - 1.03 | MPa |
| Injection instructions |
|---|
| Elastocon® CLR15 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 171 | °C | |
| Cylinder Zone 3 Temp. | 171 - 177 | °C | |
| Cylinder Zone 4 Temp. | 182 - 188 | °C | |
| Cylinder Zone 5 Temp. | 177 - 182 | °C | |
| Die Temperature | 160 - 171 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 75 to 125 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® P60B08-S | Polyram Ram-On Industries | PP Homopolymer | Polytron® |
| Sylvin 2910-55 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Durethan® DP 2801 000000 | LANXESS Corporation | Nylon 66 | Durethan® |
| Geon™ HTX 66311 | PolyOne Corporation | PVC Alloy | Geon™ HTX |
| EMOPLEN® CP-M 8081 | EMAS Plastik San.Tic.AS. | PP Copolymer | EMOPLEN® |
