Order Products : sales@su-jiao.com
WPP PP PPH2MF1-Black
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 74lqqx_WPP-PP-PPH2MF1-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WPP PP PPH2MF1-Black is a polypropylene homopolymer (PP Homopoly) product, which contains 12% mica filler. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield 1 | 34.0 | MPa | ASTM D638 |
| Yield | 34.0 | MPa | ISO 527-2/50 |
| Flexural Modulus | |||
| -- 2 | 2500 | MPa | ASTM D790 |
| -- 3 | 2500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.5 | kJ/m² | ISO 179 |
| Notched Izod Impact (23°C) | 34 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, not annealed | 75.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 74.0 | °C | ISO 75-2/Af |
| Additional Information |
|---|
| Material is tested at 73 ± 3°F and 50 ± 5% Relative Humidity unless otherwise noted. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| 3 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 B TFE 13 SI 2 | RTP Company | Nylon 610 | RTP |
| SUSTADUR PET FG | Röchling Sustaplast SE & Co. KG | PET | SUSTADUR |
| ALTECH® PA6 C 2010/506 GF10 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Kynar® 761 | Arkema | PVDF | Kynar® |
| HyTemp® 4054 | Zeon Chemicals L.P. | Acrylic, Unspecified | HyTemp® |
