Order Products : sales@su-jiao.com
RELENE® 1070LA17
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 73Mgyu_RELENE-1070LA17.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 1070LA17 is an extrusion coating grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. This grade is specially developed for extrusion coating on different substrates and contains no additives. It exhibits excellent drawdown characteristics maintaining good adhesion, with very low neck-in even at high line speeds. It can also be easily processed into thin gauge films for adhesive lamination and heat pressure lamination. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 18.0 | MPa | |
| TD : Break, 40 µm, Blown Film | 15.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 250 | % | |
| TD : Break, 40 µm, Blown Film | 400 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TARFLON™ LEV2200KL | Idemitsu Kosan Co., Ltd. | PC | TARFLON™ |
| Ultradur® B 4300 G6 HR LS BK15045 | BASF Corporation | PBT | Ultradur® |
| DECAL® 1760 | Synres-Almoco BV | Phenolic | DECAL® |
| Globalene® STM866 | Lee Chang Yung Chemical Industry Corp. | PP, Unspecified | Globalene® |
| G-Lene W50A009 | Gas Authority of India Limited | HDPE | G-Lene |
