Order Products : sales@su-jiao.com

KPOL-PP K-PPH 10.0

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	71DpoN_KPOL-PP-K-PPH-10-0.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Polypropylene Homopolymer - High Stiffness / Impact Strength Balance

Characteristics

The KPOL® is specially developed for producing rigid injection molded articles for general purpose applications, specially designed to achieve high stiffness/impact strength balance.

It gives consistent processability and high gloss at the products. It is a controlled rheology grade.

Applications

The KPOL® is a homopolymer used for general purpose injection moulding applications.

It is suitable for production of complex articles with long flow paths and thin walls.

Typical applications are closures and garden furniture.

General Information
Additive	Antioxidant
Features	Antioxidant Controlled Rheology General Purpose Good Impact Resistance Good Processability Good Stiffness High Gloss High Rigidity Homopolymer
Uses	Closures Furniture Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	72		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	35.0	MPa	ASTM D638
Tensile Elongation ²(Break)	10	%	ASTM D638
Flexural Modulus - 1% Secant	1600	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	28	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	96.0	°C	ASTM D648
Vicat Softening Temperature	153	°C	ASTM D1525 ³

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min
3 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
VYLOPET® EMC317A	TOYOBO America, Inc.	PC+PBT	VYLOPET®
Unichem 9000	Colorite Polymers	PVC, Unspecified	Unichem
ALTECH® PP-H A 4940/506 MR40	ALBIS PLASTIC GmbH	PP Homopolymer	ALTECH® PP-H
Generic SBC	Generic	SBC	Generic
ICORENE® 9909	ICO Polymers EMEA, A Division of A. Schulman	PC	ICORENE®