Order Products : sales@su-jiao.com
Hanwha Total TPE SE87
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 712kpW_Hanwha-Total-TPE-SE87.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SE87 Thermoplastic Elastomer is a dynamically fully cured thermoplastic elastomer. There is no vulcanization, and this is shipped pre-mixed an ready to process. This can be processed on extrusion,injection and blow molding equipment for faster molding cycle times and lower per-part costs. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 87 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 15.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 520 | % | ASTM D412 |
| Tear Strength | 59.8 | kN/m | ASTM D624 |
| Compression Set (25°C, 70 hr) | 45 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -58.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 to 200 | °C | |
| Middle Temperature | 185 to 195 | °C | |
| Front Temperature | 180 to 190 | °C | |
| Processing (Melt) Temp | 210 | °C | |
| Mold Temperature | 30.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 to 190 | °C | |
| Cylinder Zone 2 Temp. | 185 to 195 | °C | |
| Cylinder Zone 3 Temp. | 190 to 200 | °C | |
| Adapter Temperature | 200 to 210 | °C | |
| Die Temperature | 210 to 220 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime 4240 NAT 01 | Prime PVC® | PVC, Rigid | Prime |
| Shandong Aobang TPU-Polyester 95-A | Shandong Aobang Chemical Technology Co.,Ltd. | TPU-Polyester | Shandong Aobang TPU-Polyester |
| Braskem PE ES6004 | Braskem | HDPE | Braskem PE |
| Electrafil® J-50/CF/30 | Techmer Engineered Solutions | PC | Electrafil® |
| ICORENE® 9104 GW1 Natural 0000 | ICO Polymers EMEA, A Division of A. Schulman | LLDPE | ICORENE® |
