Order Products : sales@su-jiao.com
POLYCOMPO PE 45200
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6z70Cu_POLYCOMPO-PE-45200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 45200 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Caps/Lids/Closures. Primary characteristic: rigid. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.943 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 20 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 7.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 60 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 20.0 | MPa | |
| Break, Injection Molded | 12.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | 290 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 650 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.8 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 118 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 126 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4903 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Arak HDPE EX3B (GM5010T2) | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| ELASTOSIL® LR 3842/50 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| LNP™ THERMOCOMP™ PF005S compound | SABIC Innovative Plastics | Nylon 6 | LNP™ THERMOCOMP™ |
| ALCOM® MED PS 1000 14113 | ALBIS PLASTIC GmbH | PS (HIPS) | ALCOM® MED PS |
