Order Products : sales@su-jiao.com

ALKAMIX™ MB-6005

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Marplex Australia Pty. Ltd.
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6xLIyC_ALKAMIX-MB-6005.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX™ MB-6005 is a combined slip and antiblock masterbatch based on a low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 8 percent and antiblock additive at a concentration of 25 percent. ALKAMIX™ MB-6005 can be added to linear low density polyethylene (LLDPE) during extrusion to reduce the film blocking and coefficient of friction. The level required will vary according to the desired properties and the presences of any other additives, however the recommended addition level is between 1 and 2 percent. The maximum level of addition of ALKAMIX™ MB-6005 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 2.5% when added to a polyethylene formulation free from any other additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

Message

ALKAMIX™ MB-6005 is a combined slip and antiblock masterbatch based on a low density polyethylene carrier. It is formulated with slip additive (Erucamide) at a concentration of 8 percent and antiblock additive at a concentration of 25 percent.

ALKAMIX™ MB-6005 can be added to linear low density polyethylene (LLDPE) during extrusion to reduce the film blocking and coefficient of friction. The level required will vary according to the desired properties and the presences of any other additives, however the recommended addition level is between 1 and 2 percent.

The maximum level of addition of ALKAMIX™ MB-6005 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 2.5% when added to a polyethylene formulation free from any other additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

General Information
Additive	Antiblock (25%) Erucamide Slip (8%)
Features	Antiblocking Slip
Uses	Masterbatch

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505

Injection	Nominal Value	Unit
Processing (Melt) Temp	< 200	°C

Resin Grade	Manufacturer	Category	Trademark
Michilene F8100GC40	API Polymers, Inc.	PP Homopolymer	Michilene
Sylvin 8864-70D Natural	Sylvin Technologies Incorporated	PVC, Semi-Rigid	Sylvin
Braskem PP FP450WV	Braskem America Inc.	PP Homopolymer	Braskem PP
APEX® 94-A0098A-75	Teknor Apex Company	PVC, Flexible	APEX®
Karina BLACK PVC COMPOUND 772-48/1-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina