Order Products : sales@su-jiao.com
Lanufene HDI-5005
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Ras Lanuf Oil & Gas Processing Company (RASCO) |
| Trademark: | Lanufene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6x15H6_Lanufene-HDI-5005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LANUFENE HDI 5005 is a high density polyethylene resin intended for use primarily in injection molding and silane PEX pipes applications. LANUFENE HDI 5005 combines excellent stress cracking resistance (ESCR) and impact strength with low warpage, excellent gloss and good moldability. LANUFENE HDI 5005 is recommended for injection molding applications - trash box, toys, industrial parts, and shoulder of laminated tube for toothpaste where good ESCR and impact strength are needed. LANUFENE HDI 5005 can be also used for good base resin of silane XLPE (PEX) pipes application such as hot water and floor - heating pipes, portable water pipes and sanitary pipes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 200 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1000 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 60 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 to 270 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Torelina® A310E | Toray Resin Company | PPS | Torelina® |
| ASTALAC™ ABS M20 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Elastron® G G601.A75.B | Elastron USA, Inc. | SEBS | Elastron® G |
| INTOL® 1783 | Versalis S.p.A. | SBR, Emulsion | INTOL® |
| Pacrel® 6365N | Nanjing Jinling OPTA Polymer Co., Ltd. | TPV | Pacrel® |
