Order Products : sales@su-jiao.com
ENSOFT SL-300-60A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ENPLAST, a Ravago Group Company |
| Trademark: | ENSOFT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6wepxg_ENSOFT-SL-300-60A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ENSOFT SL-300-60A is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in North America or Europe. The main characteristics are: good UV resistance. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 2.00 | MPa | ISO 37 |
| 300% strain | 3.00 | MPa | ISO 37 |
| Tensile Stress (Break) | 7.50 | MPa | ISO 37 |
| Tensile Elongation (Break) | 670 | % | ISO 37 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 19 | % | ASTM D395B |
| 70°C, 22 hr | 43 | % | ASTM D395B |
| Additional Information |
|---|
| The value listed as Density, ISO 1183, was tested in accordance with ISO 2781.Tear Strength, ISO 34-2: 22 kN/mOzone Resistance, ISO 1431: No Crack |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 160 | °C | |
| Front Temperature | 170 - 180 | °C | |
| Nozzle Temperature | 185 - 190 | °C | |
| Processing (Melt) Temp | 190 - 200 | °C | |
| Mold Temperature | 10.0 - 50.0 | °C | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMTAL PM1429 | Polyram Ram-On Industries | Acetal (POM) Copolymer | RAMTAL |
| VICTREX® PEEK 650GL30 | Victrex plc | PEEK | VICTREX® PEEK |
| ALFATER XL® A60I 4FC0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Elastron® G G101.D47.B | Elastron USA, Inc. | SEBS | Elastron® G |
| Latilub 66-15T G/30 | LATI S.p.A. | Nylon 66 | Latilub |
