| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6viZYU_RELENE-1020FA20.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| 1020FA20 is a film grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. It can be extruded with considerable ease on any conventional LDPE extruder. The polymer is manufactured without any slip additive to facilitate adhesion during lamination. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 20.0 | MPa | |
| TD : Break, 40 µm, Blown Film | 19.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 280 | % | |
| TD : Break, 40 µm, Blown Film | 430 | % | |
| Dart Drop Impact (40 µm, Blown Film) | 120 | g | ASTM D1709A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MTEGRITY™ HDPE HD110 | M. Holland Company | HDPE | MTEGRITY™ HDPE |
| Toraycon® 1200MF | Toray Plastics (Malaysia) Sdn. Bhd. | PBT | Toraycon® |
| Unipren® Elastomers A3 NTLA010 55A UP302 | Petropol Industry and Trade of Polymers LTDA | SEBS | Unipren® Elastomers |
| ALFATER XL® A80I 4FC0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Plaslube® PA6/6 GF30 ML5 HS | Techmer Engineered Solutions | Nylon 66 | Plaslube® |