Order Products : sales@su-jiao.com
Pro PP-CO-30T
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Pro Polymers |
| Trademark: | Pro-Comp™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6uaE8d_Pro-PP-CO-30T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP-CO-30T is a 30% Talc Filled, Polypropylene Copolymer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18mm | 1.0 | % | ASTM D955 |
| Transverse flow : 3.18mm | 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 28.0 | MPa | ASTM D638 |
| Flexural Modulus | 2800 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 81 | J/m | ASTM D256 |
| Dart Drop Impact | 2.00 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 126 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 72.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Melt Flow Rate, ASTM D1238, 230°C/2.1kgf: 8 to 12 g/10 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Alkadyne™ HDF145B | Qenos Pty Ltd | HDPE, HMW | Alkadyne™ |
| Evoprene™ G 991 | AlphaGary | SEBS | Evoprene™ G |
| LUVOCOM庐 6-8438-1 | Lehmann & Voss & Co. | Nylon 12 | LUVOCOM® |
| POLYfill PPH TS15020 D | Polykemi AB | PP Homopolymer | POLYfill |
| NORYL GTX™ GTX830 resin | SABIC Innovative Plastics | PPE+PS+Nylon | NORYL GTX™ |
