Order Products : sales@su-jiao.com
Formolene® 1102K
| Category: | PP, High Crystal , High Crystallinity Polypropylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6uUCRZ_Formolene-1102K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 1102K is a high molecular weight, highly isotactic, polypropylene homopolymer designed for extrusion processes, notably biaxially oriented film (BOPP). It contains a unique combination of stabilizers, which provides excellent processability and good end use performance. It does not contain slip or antiblock. Formolene® 1102K meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 34.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1380 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 53 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BECN TL | Arkema | Nylon 11 | Rilsan® |
| TERRAMAC TE-2000 | UNITIKA Plastics Division | PLA | TERRAMAC |
| Chemical Resources HD40948 | Chemical Resources, Inc. | HDPE | Chemical Resources |
| DURANEX® GFR330 | Polyplastics Co., Ltd. | PBT | DURANEX® |
| Electrafil® 1105-10819 | Techmer Engineered Solutions | PEEK | Electrafil® |
