Order Products : sales@su-jiao.com
Marlex® 9518H
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6tMRGD_Marlex-9518H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® 9518H is a High Density (HMW) Polyethylene material. It is available in Latin America or North America for blow molding. Important attributes of Marlex® 9518H are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.34 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 24.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 31.7 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 500 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(Compression Molded) | 1480 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746A |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stat-Tech™ AS-15CF/000 | PolyOne Corporation | ABS | Stat-Tech™ |
| Wanthane® WHT-1198 | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| ASTALOY™ PC/ABS M150-28328 | Marplex Australia Pty. Ltd. | PC+ABS | ASTALOY™ |
| Geon™ Vinyl Rigid Extrusion L6701 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| KumhoSunny PC/PBT HCB9230 | Shanghai KumhoSunny Plastics Co., Ltd. | PC+PBT | KumhoSunny PC/PBT |
