Order Products : sales@su-jiao.com
INEOS HDPE TC46-25
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6qLlXl_INEOS-HDPE-TC46-25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TC46-25 is a natural high density polyethylene copolymer designed specifically for telecommunications ducting to meet or exceed the material requirements in conduit specifications ASTM F2160, UL 651B and NEMA TC-7. TC46-25 balances stiffness, ESCR and molecular weight to provide required toughness and crush strength without compromising processability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.30 | g/10 min | |
| 190°C/21.6 kg | 24 | g/10 min | |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | > 1000 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 20.7 | MPa | |
| Break | 27.6 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 8.0 | % | |
| Break | 600 | % | |
| Flexural Modulus - 2% Secant | 896 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 190 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 19.1 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 68.9 | °C | ASTM D648 |
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 124 | °C | ASTM D1525 |
| Oxidation Induction Time (210°C) | 20 | min | ASTM D3895 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Cell Classification | 435430A | ASTM D3350 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP M1701 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Moplen EP300L | PolyMirae | PP Copolymer | Moplen |
| GAPEX® RPP30DA | Ferro Corporation | PP, Unspecified | GAPEX® |
| ESPRENE EPDM 6101 | Sumitomo Chemical Co., Ltd. | EPDM | ESPRENE EPDM |
| INELEC PA12CF20 | Infinity LTL Engineered Compounds | Nylon 12 | INELEC |
