Order Products : sales@su-jiao.com
Desmopan® DP 3055D
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6pvAyW_Desmopan-DP-3055D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; with high mechanical strength for articles subject to wear; excellent abrasion resistance; good wear resistance; very short cycle times; Application; Injection molded engineering parts; Rollers |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1220 | kg/m³ | ISO 1183 1 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 2 | ||
| Shore A, 3 sec | 96 | ||
| Shore D, 15 sec | 56 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3 | DIN 53504 | ||
| Break, 23°C | 53.5 | MPa | |
| 10% Strain, 23°C | 14.0 | MPa | |
| 50% Strain, 23°C | 19.9 | MPa | |
| 100% Strain, 23°C | 22.2 | MPa | |
| 300% Strain, 23°C | 39.5 | MPa | |
| Tensile Strain 4(Break, 23°C) | 410 | % | DIN 53504 |
| Flexural Modulus 5(23°C) | 128 | MPa | ISO 178 |
| Abrasion Resistance (23°C) | 26.0 | mm³ | ISO 4649-A |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 1.20 | GPa | |
| 20°C | 0.256 | GPa | |
| 60°C | 0.117 | GPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience (23°C) | 35 | % | ISO 4662 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 6(23°C) | 140 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 21 | % | |
| 70°C, 24 hr | 43 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 110 | °C | |
| Processing (Melt) Temp | 220 to 240 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | 200 mm/min |
| 4 . | 200 mm/min |
| 5 . | 2.0 mm/min |
| 6 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ming Dih EPS S3-211 | Ming Dih Group Corporation | PS (EPS) | Ming Dih EPS |
| RJM SE801G20 | RJM International, Inc. | AS | RJM |
| WPP PP PPC1TF1.3 848 Black | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| DESLON™ 66 DSC201G8 | DESCO Co., Ltd. | Nylon 66 | DESLON™ 66 |
| INNOPOL® PP CS 2-9522 | Inno-Comp Ltd. | PP Copolymer | INNOPOL® PP |
