Order Products : sales@su-jiao.com
UNITIKA Nylon 6 A1030FR
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UNITIKA Plastics Division |
| Trademark: | UNITIKA Nylon 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6i7BN4_UNITIKA-Nylon-6-A1030FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITIKA Nylon 6 A1030FR is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific or North America. Primary attribute of UNITIKA Nylon 6 A1030FR: Fast Molding Cycle. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.13 | 1.13 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow : 3.20 mm | 1.3 | 1.3 | % | |
| Flow : 3.20 mm | 1.0 | 1.0 | % | |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 1.8 | 1.8 | % | |
| Equilibrium, 23°C, 50% RH | 2.8 | 2.8 | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 112 | 90 | ISO 2039-2 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2500 | 900 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 78.0 | 40.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Yield | 4.0 | 24 | % | |
| Break | 68 | > 200 | % | |
| Flexural Modulus | 2500 | 900 | MPa | ISO 178 |
| Flexural Stress | 97.0 | 33.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | 43 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | No Break | No Break | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 154 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 56.0 | -- | °C | ISO 75-2/A |
| CLTE - Flow | 9.6E-5 | 9.6E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 3.0E+15 | 8.0E+13 | ohms·cm | IEC 60093 |
| Electric Strength (1.00 mm) | 37 | 33 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 3.40 | 3.70 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.020 | 0.080 | IEC 60250 | |
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 1203-30 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| Westlake LDPE EC811AA | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| BESTNYL SI00VI02BU | Triesa Plastics | Nylon 6 | BESTNYL |
| KMI PP KM-554IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
| Lucofin® 1492M HG | Lucobit AG | EBA | Lucofin® |
