Order Products : sales@su-jiao.com
DAI-EL™ G-7800BP
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6giDr3_DAI-EL-G-7800BP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL G-7800BP is a bisphenol curable, gum copolymer. It has excellent mold flow compared with fluoroelastomers of similar Mooney viscosity, which makes it well suited for compression, transfer or injection molding. Properly compounded, DAI-EL G-7800BP produces vulcanizates with excellent heat and compression set resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | |
| Mooney Viscosity (ML 1+10, 121°C) | 86 | MU | |
| Fluorine Content | 66 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Brittleness - TR10 | -18 | °C | ASTM D1329 |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness 1(Shore A) | 75 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% Strain, 25°C 2 | 6.40 | MPa | |
| 100% Strain, 25°C 3 | 6.00 | MPa | |
| Tensile Strength | |||
| Yield, 25°C 4 | 13.6 | MPa | |
| Yield, 25°C 5 | 12.8 | MPa | |
| Tensile Elongation | |||
| Break, 25°C 6 | 190 | % | |
| Break, 25°C 7 | 210 | % | |
| Compression Set | ASTM D395B | ||
| 200°C, 70 hr 8 | 14 | % | |
| 200°C, 70 hr 9 | 15 | % |
| Note Message | |
|---|---|
| 1 . | ODR, Strain: 3°, Test time: 12 min |
| 2 . | ODR, Strain: 3°, Test time: 12 min |
| 3 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 4 . | ODR, Strain: 3°, Test time: 12 min |
| 5 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 6 . | ODR, Strain: 3°, Test time: 12 min |
| 7 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 8 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 9 . | ODR, Strain: 3°, Test time: 12 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 NL XA70 | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Yanshan PE 1500J | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| DURANEX® 531HS | Polyplastics Co., Ltd. | PBT | DURANEX® |
| LONGLITE® PMC T375J | CCP Group | Phenolic | LONGLITE® PMC |
| AvaSpire® AV-651 GF50 | Solvay Specialty Polymers | PAEK | AvaSpire® |
