Order Products : sales@su-jiao.com
ACLAR® 22C (3 mil)
| Category: | PCTFE , Polychlorotrifluoroethylene |
| Manufacturer: | Honeywell |
| Trademark: | ACLAR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6gMI2M_ACLAR-22C-3-mil-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ACLAR®22C (3 mil) is a polytrifluoroethylene (PCTFE) product,. It can be processed by casting film and is available in North America, Europe or Asia Pacific. Typical application areas are: packaging. The main characteristics are: copolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.08 | g/cm³ | ASTM D1505 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| MD : 76 µm | 1040 | MPa | ASTM D882 |
| TD : 76 µm | 1040 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 76 µm | 62.0 | MPa | ASTM D882 |
| TD : Yield, 76 µm | 41.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Yield, 76 µm | 190 | % | ASTM D882 |
| TD : Yield, 76 µm | 230 | % | ASTM D882 |
| Water Vapor Transmission | 0.17 | g/m²/24 hr | ASTM E96 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Conductivity | 0.22 | W/m/K | ASTM C177 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (0.0762 mm) | 100 | % | ASTM D2863 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (76.2 µm) | 1.0 | % | ASTM D1003 |
| Additional Information |
|---|
| Yield, No Standard: 6.3 m²/kgTear Strength, ASTM D1004, Graves MD: 300 to 350 g/milTear Strength, ASTM D1004, Graves TD: 250 to 325 g/milCrystalline Melting Point, ASTM D4591: 190 °CDimensional Stability, ASTM D1204, MD: 3 to 8 %Dimensional Stability, ASTM D1204, TD: -3 to -8 %All film properties were tested as an average value. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SolVin 373MH | INOVYN | PVC, Unspecified | SolVin |
| Thermoset Plastics 311 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| XANTAR® 25 U | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Multilon® T-2754 | TEIJIN LIMITED | PC+ABS | Multilon® |
| Cleapact TI-300S | DIC Corporation | SBC | Cleapact |
